Which master uses a plastic company, hot plate welding technology?

The hot plate welding is mainly welded by a heating plate controlled by temperature. When welding, the heating plate is placed between the two plastic parts. When the workpiece is close to the heating plate, the plastic begins to melt. After a pre -set heating time passes, the plastic on the surface of the workpiece will reach a certain degree of melting. At this time, the workpiece is separated to both sides and the heating board is removed. After the welding depth, the entire welding process is completed. It belongs to the direct thermal tool welding category of plastic heat tool welding. The process of direct thermal tool welding usually includes four stages: preparation phase, heating (preheating) cycle, switching cycle, and pressure welding cycle. This welding method is mainly used for welding pipes, profiles, and molding parts, and its wall thickness is generally greater than 0.8mm. Its welding method is mainly: pavailing welding, right -angle welding, bending welding, welding, etc. Important welding parameters are: heating pressure, heating time, switching time, welding pressure force, welding pressure time, temperature of hot plate, welding temperature. Seeking to adopt! Intersection