3 thoughts on “The development status and trend of the CNC industry”
Leslie
The development of the upstream and downstream markets in the Chinese CNC system is as follows: If industrial control machine Igly, industrial computer, that is, industrial computers. It is the core of the control system in the control system. In recent years, the increase in demand for other application industries such as transportation, medical care, finance, and communications has provided greater assistance to the growth of the market size of the industrial control machine. If data from the Industrial Control Network shows that the size of China's industrial control machine market reached 4.81 billion yuan in 2012, an increase of 3.5%year -on -year. In 2015, the market size of my country's industrial control machines was around 6 billion yuan, reaching 9.4 billion yuan in 2019, a compound growth rate of 9.31%in 2011 to 2019, and a compound growth rate of 11.88%in 2015 to 2019.
The display screen The application of the display screen is relatively wide. Existence, the CNC system is no exception. In recent years, the scale of my country's display market has increased year by year. In 2019, the scale of my country's display market achieved 25.3 billion yuan, an increase of about 30%over 2018.
The power module The power module has a wide range of applications in the power electronics field, and it is also one of the core modules of CNC systems. In recent years, with the continuous development of its downstream market, my country's power module (including power IC) market scale has continued to expand. In 2019, its market size achieved approximately 187.3 billion yuan, an increase of 7.83%over 2018. The growth rate is higher than the global average, and the industry market has grown rapidly. (Note: China's power module (including power IC) market size is calculated based on global market size data provided by MEMS and the Chinese market share (40%). The exchange rate uses the RMB against the US dollar exchange rate on September 11, 2020, For reference only.)
Ser serviced motor File motor is one of the most important control and execution agencies of CNC systems. Textile machinery, printing machinery and packaging machinery are widely used. At the same time, with the rapid expansion of industrial robots and electronic manufacturing equipment in recent years, the application scale of servo motors in emerging industries has grown rapidly. big. In 2018, the size of my country's servo motor market was about 13.42 billion yuan, an increase of 6.20%year -on -year. In 2019, the market size of my country's servo motor industry reached 14.53 billion yuan, with a growth rate of about 8.27%.
CNC machine tools Nee control machine tool market is the main downstream market for CNC systems. The market size of the CNC system. From 2017-2019, my country's CNC machine tool industry has fluctuated large. In 2018, the scale of my country's CNC machine tool industry was 334.7 billion yuan, a year -on -year growth rate of 10.50%, which was slower than the growth rate in 2017. In 2019, the scale of my country's CNC machine tool industry was 327 billion yuan, a year -on -year decrease of 2.30%. The main coefficient control machine tool industry's overall demand structure is adjusted and upgraded, and the downstream areas are not caused by the downturn.
The development prospects —— Broaden development prospects Integrate, my country's CNC system industry has developed well, raw material formation supply is sufficient, and at present my country is in the middle of industrialization. From the resolution of shortages to the mainstay to the construction of a strong economic country, coal, automobiles, steel, real estate, building materials, machinery, electronics, chemical industry and other groups of high -growth industries have strong development momentum. The huge demand for the machine tool market, especially the CNC machine tools, will further drive the growth of my country's CNC system industry. my country's CNC system industry has a broad market prospect, and the market size may continue to expand in the future. -The above data comes from the Prospective Industry Research Institute's "China CNC System Industry Development Prospects and Investment Forecast Analysis Report".
主要上市公司：日发精机(002520)、国盛智科(688558)、科德数控(688305)、海天精工(601882)、创世纪(300083)、青海华鼎(600243)、华东数控(002248)、 Deman (688577), Shandong Weida (002026), Yujing (002943), Tanaka Precision Machinery (300461) The N industry is in the domestic stage of mid -to -high -end products . For a long time, domestic CNC machine tools have always been in low -end and rapid expansion, and the mid -range progress has been slow. High -end relying on imports, especially key equipment required by national key projects, mainly rely on imports. Technology is subject to people. Essence The growth of the industry needs to "change" slowly. The industry is in the stage of localization of the mid -to -high -end products. The domestic and high -end CNC domesticization of the Chinese CNC machine tool industry will not come quickly. 2020 The market-based specifications dropped nearly 1/4 2017-2019 that I had a large scale of the production industry in China. In 2018, the scale of my country's CNC machine tool industry was 334.7 billion yuan, a year -on -year growth rate of 10.50%, which was slower than the growth rate in 2017. In 2019, the scale of my country's CNC machine tool industry was 327 billion yuan, a year -on -year decrease of 2.30%. The main coefficient control machine tool industry's overall demand structure is adjusted and upgraded, and the downstream areas are not caused by the downturn. Affected by the epidemic in 2020, the scale of China's CNC machine tool industry reached 247.3 billion yuan, a year -on -year decrease of 24.37%. The largest number of companies related to abrasives Statistics data of the State Bureau of Statistics and China Machine Tools Association show that the machine tool market in 2019 shows the total demand volatility contraction and demand structure adjustment and upgrade. Features, accompanied by this industry structure and balance are broken. In the process of adjustment of this change, industry companies have made unremitting efforts to adapt to the fierce changes in the market. Some companies focus on the main business, deeply cultivate market demand, and adapt to the further improvement of market capabilities. The more serious business difficulties, serious losses, tight funds, and even some have to reorganize or be in a state of discontinuation and semi -suspended production, major differentiation in the industry pattern. In the data of the China Machine Tools Association, as of December 2020, the composition of enterprises above designated size in my country's machine tool industry is as follows: a total of 5,720 companies, involving eight subcontments: 833 metal cutting machine tools (accounting for 14.56%) , 529 metal molding machine tools (accounting for 9.25%), 747 work tools and measuring instruments (3.06%), 2025 abrasives (35.4%), 356 functional components and accessories (6.22%), casting), casting 467 machinery (8.16%), 127 wood and bamboo processing machinery (accounting for 2.22%), and 636 other metal processing machinery (11.12%). The main demand of the downstream of CNC Airport If in the perspective of the proportion of downstream consumption demand in the CNC machine tool industry, cars are the main field of downstream demand, with about 40%of consumption; followed by aerospace, consumption proportion, the proportion of consumption proportion About 17%; molds and engineering machinery are the third and fourth consumption fields of CNC machinery, respectively, accounting for about 13%and 10%, respectively. In 2026, the market size exceeds 540 billion yuan In view of market sales scale, from 2021-2026, the main demand area of my country's CNC machine tools enters the adjustment period, which will affect CNC machine tools within a period of time. The sales volume will increase the demand for CNC machine tools after the adjustment period, which will increase the growth rate of CNC machine tool sales. 2020 in the shadow of the epidemic, the downstream application market has reduced the demand for machine tools in the short term. In 2026, it will exceed 540 billion yuan. It data refer to the "Analysis Report of the Market Demand Planning and Investment Strategic Planning of the Chinese CNC Machine Tool Industry in China CNC Machine Tool Industry".
n00:00 / 01: 4970% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increase volume 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description
The development of the upstream and downstream markets in the Chinese CNC system is as follows:
If industrial control machine
Igly, industrial computer, that is, industrial computers. It is the core of the control system in the control system. In recent years, the increase in demand for other application industries such as transportation, medical care, finance, and communications has provided greater assistance to the growth of the market size of the industrial control machine.
If data from the Industrial Control Network shows that the size of China's industrial control machine market reached 4.81 billion yuan in 2012, an increase of 3.5%year -on -year. In 2015, the market size of my country's industrial control machines was around 6 billion yuan, reaching 9.4 billion yuan in 2019, a compound growth rate of 9.31%in 2011 to 2019, and a compound growth rate of 11.88%in 2015 to 2019.
The display screen
The application of the display screen is relatively wide. Existence, the CNC system is no exception. In recent years, the scale of my country's display market has increased year by year. In 2019, the scale of my country's display market achieved 25.3 billion yuan, an increase of about 30%over 2018.
The power module
The power module has a wide range of applications in the power electronics field, and it is also one of the core modules of CNC systems. In recent years, with the continuous development of its downstream market, my country's power module (including power IC) market scale has continued to expand. In 2019, its market size achieved approximately 187.3 billion yuan, an increase of 7.83%over 2018. The growth rate is higher than the global average, and the industry market has grown rapidly.
(Note: China's power module (including power IC) market size is calculated based on global market size data provided by MEMS and the Chinese market share (40%). The exchange rate uses the RMB against the US dollar exchange rate on September 11, 2020, For reference only.)
Ser serviced motor
File motor is one of the most important control and execution agencies of CNC systems. Textile machinery, printing machinery and packaging machinery are widely used. At the same time, with the rapid expansion of industrial robots and electronic manufacturing equipment in recent years, the application scale of servo motors in emerging industries has grown rapidly. big. In 2018, the size of my country's servo motor market was about 13.42 billion yuan, an increase of 6.20%year -on -year. In 2019, the market size of my country's servo motor industry reached 14.53 billion yuan, with a growth rate of about 8.27%.
CNC machine tools
Nee control machine tool market is the main downstream market for CNC systems. The market size of the CNC system. From 2017-2019, my country's CNC machine tool industry has fluctuated large. In 2018, the scale of my country's CNC machine tool industry was 334.7 billion yuan, a year -on -year growth rate of 10.50%, which was slower than the growth rate in 2017. In 2019, the scale of my country's CNC machine tool industry was 327 billion yuan, a year -on -year decrease of 2.30%. The main coefficient control machine tool industry's overall demand structure is adjusted and upgraded, and the downstream areas are not caused by the downturn.
The development prospects —— Broaden development prospects
Integrate, my country's CNC system industry has developed well, raw material formation supply is sufficient, and at present my country is in the middle of industrialization. From the resolution of shortages to the mainstay to the construction of a strong economic country, coal, automobiles, steel, real estate, building materials, machinery, electronics, chemical industry and other groups of high -growth industries have strong development momentum. The huge demand for the machine tool market, especially the CNC machine tools, will further drive the growth of my country's CNC system industry. my country's CNC system industry has a broad market prospect, and the market size may continue to expand in the future.
-The above data comes from the Prospective Industry Research Institute's "China CNC System Industry Development Prospects and Investment Forecast Analysis Report".
主要上市公司：日发精机(002520)、国盛智科(688558)、科德数控(688305)、海天精工(601882)、创世纪(300083)、青海华鼎(600243)、华东数控(002248)、 Deman (688577), Shandong Weida (002026), Yujing (002943), Tanaka Precision Machinery (300461)
The N industry is in the domestic stage of mid -to -high -end products
. For a long time, domestic CNC machine tools have always been in low -end and rapid expansion, and the mid -range progress has been slow. High -end relying on imports, especially key equipment required by national key projects, mainly rely on imports. Technology is subject to people. Essence The growth of the industry needs to "change" slowly. The industry is in the stage of localization of the mid -to -high -end products. The domestic and high -end CNC domesticization of the Chinese CNC machine tool industry will not come quickly.
2020 The market-based specifications dropped nearly 1/4
2017-2019 that I had a large scale of the production industry in China. In 2018, the scale of my country's CNC machine tool industry was 334.7 billion yuan, a year -on -year growth rate of 10.50%, which was slower than the growth rate in 2017. In 2019, the scale of my country's CNC machine tool industry was 327 billion yuan, a year -on -year decrease of 2.30%. The main coefficient control machine tool industry's overall demand structure is adjusted and upgraded, and the downstream areas are not caused by the downturn. Affected by the epidemic in 2020, the scale of China's CNC machine tool industry reached 247.3 billion yuan, a year -on -year decrease of 24.37%.
The largest number of companies related to abrasives
Statistics data of the State Bureau of Statistics and China Machine Tools Association show that the machine tool market in 2019 shows the total demand volatility contraction and demand structure adjustment and upgrade. Features, accompanied by this industry structure and balance are broken. In the process of adjustment of this change, industry companies have made unremitting efforts to adapt to the fierce changes in the market. Some companies focus on the main business, deeply cultivate market demand, and adapt to the further improvement of market capabilities. The more serious business difficulties, serious losses, tight funds, and even some have to reorganize or be in a state of discontinuation and semi -suspended production, major differentiation in the industry pattern.
In the data of the China Machine Tools Association, as of December 2020, the composition of enterprises above designated size in my country's machine tool industry is as follows: a total of 5,720 companies, involving eight subcontments: 833 metal cutting machine tools (accounting for 14.56%) , 529 metal molding machine tools (accounting for 9.25%), 747 work tools and measuring instruments (3.06%), 2025 abrasives (35.4%), 356 functional components and accessories (6.22%), casting), casting 467 machinery (8.16%), 127 wood and bamboo processing machinery (accounting for 2.22%), and 636 other metal processing machinery (11.12%).
The main demand of the downstream of CNC Airport
If in the perspective of the proportion of downstream consumption demand in the CNC machine tool industry, cars are the main field of downstream demand, with about 40%of consumption; followed by aerospace, consumption proportion, the proportion of consumption proportion About 17%; molds and engineering machinery are the third and fourth consumption fields of CNC machinery, respectively, accounting for about 13%and 10%, respectively.
In 2026, the market size exceeds 540 billion yuan
In view of market sales scale, from 2021-2026, the main demand area of my country's CNC machine tools enters the adjustment period, which will affect CNC machine tools within a period of time. The sales volume will increase the demand for CNC machine tools after the adjustment period, which will increase the growth rate of CNC machine tool sales.
2020 in the shadow of the epidemic, the downstream application market has reduced the demand for machine tools in the short term. In 2026, it will exceed 540 billion yuan.
It data refer to the "Analysis Report of the Market Demand Planning and Investment Strategic Planning of the Chinese CNC Machine Tool Industry in China CNC Machine Tool Industry".
n00:00 / 01: 4970% shortcut keys to describe space: Play / suspend ESC: exit full screen ↑: increase volume 10% ↓: reduced volume decrease by 10% →: single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description